ll-kilns
12 posts tagged "ll-kilns".
- kiln-comparisons
Skutt KM-1027 vs L&L e23T: Same Circuit, $1,241 Apart
Both draw 48 amps on a 60-amp circuit with #6 copper and a NEMA 6-50. Verified August 2026 prices, element-set costs and a ten-year ownership total.
- kiln-guides
Used Kiln Buying Guide: What to Inspect Before You Pay
How to value and inspect a used electric kiln: the 208-volt trap, element and brick checks, relay and controller costs, and the point where you walk away.
- kiln-guides
Best Kilns for a Home Studio: Ranked by Cost of Ownership
Five electric kilns for a home studio, ranked by five-year total cost of ownership: purchase price, electrical install, electricity per firing, and elements.
- kiln-guides
First Kiln Buying Guide: How to Choose a Home Studio Kiln
A complete framework for buying your first electric kiln: what size to get, the electrical work required, the controller you need, and models by budget.
- kiln-guides
Kiln Controller Guide: KilnMaster vs Bartlett Genesis
How the Skutt KilnMaster and L&L Bartlett Genesis controllers work: cone-fire versus ramp-hold, 1-zone versus 3-zone firing, and which features matter.
- kiln-guides
Kiln Cost to Fire: Electricity Cost Per Model and Cone
Computed kWh and dollar cost per firing for the Skutt KM-1027, KM-1018, KM-818, L&L e23T, and Paragon Caldera at bisque and cone-6 glaze, at US average rates.
- kiln-guides
Kiln Electrical Requirements: Breaker, Wire, Receptacle
Verified breaker size, wire gauge, and receptacle type for Skutt, L&L, and Paragon kilns, from manufacturer spec sheets, with the NEC continuous-load rule.
- kiln-guides
Kiln Element Replacement: Life, Cost, and DIY vs. Tech
How long kiln elements last, the signs they are failing, what replacement sets cost for Skutt and L&L kilns, and whether to swap them yourself or call a tech.
- kiln-guides
Kiln Placement Guide: Clearances, Floors, and Siting
Manufacturer clearances for Skutt and L&L kilns, floor options, garage versus basement tradeoffs, and the real story on permits and homeowner's insurance.
- kiln-guides
Kiln Ventilation Guide: Downdraft Systems and Room Air
What kilns release during firing, why ventilation matters, how downdraft vent systems work, and how to set up safe venting in a garage or basement studio.
- kiln-comparisons
Skutt vs L&L Kilns: KM-1027 and e23T Head to Head
Skutt KM-1027 and L&L e23T both draw 48 amps and cost about $15 per cone-6 glaze firing. What separates them: element holders, controller zones, and price.
- kiln-reviews
L&L e23T Review: Hard Ceramic Element Holders, Tested
The L&L e23T fires to cone 10 in 6.7 cubic feet with hard ceramic holders that shield the elements. Verified specs, cost to fire, and how it meets the KM-1027.